Сustomization QTvcp

More
5 years 8 months ago #197247 by cmorley
Replied by cmorley on topic Сustomization QTvcp
how about this one:


Is there different versions of this screen for different monitor sizes?

Please Log in to join the conversation.

More
5 years 8 months ago #197279 by tommieh
Replied by tommieh on topic Сustomization QTvcp
I think the screen Chris pointed out is very nice

Please Log in to join the conversation.

More
5 years 8 months ago #197281 by hottabich
Replied by hottabich on topic Сustomization QTvcp
There is a link to the mail on youtube, leave your address, I will throw you a link to google disk for all the options that I have.

Please Log in to join the conversation.

More
5 years 8 months ago #197352 by cmorley
Replied by cmorley on topic Сustomization QTvcp
cant find a link you youtube for you - I did a forum connection request - not sure if that even works...

Please Log in to join the conversation.

More
5 years 8 months ago #197358 by tommylight
Replied by tommylight on topic Сustomization QTvcp

cmorley wrote: cant find a link you youtube for you - I did a forum connection request - not sure if that even works...

It does nothing as far as i can gather.
Click on the linked youtube video then click on "youtube" on the lower right side, it will open that same video on the youtube website, there under the video clock on "show more", there's the e-mail.

Please Log in to join the conversation.

More
5 years 8 months ago #197387 by hottabich
Replied by hottabich on topic Сustomization QTvcp

cmorley wrote: cant find a link you youtube for you - I did a forum connection request - not sure if that even works...

I have sent you links to google drive files. If available to you, please inform.

Please Log in to join the conversation.

More
5 years 6 months ago #206883 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Hello. And you can extend the function of the initial line to look like as in the screenshot dialog box.
I implement it with macros. It is very good to start from any line or GCode block from scratch blanks.
Or at least add a safe height to the function start line number.

Please Log in to join the conversation.

More
5 years 5 months ago #207972 by cmorley
Replied by cmorley on topic Сustomization QTvcp
Sorry I missed this - busy working long hours - is this to rapid to a specific point before restarting?

Please Log in to join the conversation.

More
5 years 5 months ago #208010 by hottabich
Replied by hottabich on topic Сustomization QTvcp
G54 x0 y0 z0, start line number 83. There is no way to add a safe height Z = 15 and speed
filing. The previous screenshot is how it is implemented in Mach3. If you have time, please see how I implement this using macros
Thanks for attention!

Please Log in to join the conversation.

More
5 years 5 months ago #209798 by cmorley
Replied by cmorley on topic Сustomization QTvcp
Something like this?

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.181 seconds
Powered by Kunena Forum