Сustomization QTvcp

Almost like that. For now dialogue window is missing an option to set up safe height to start from line execution. Dialog dro label x, y, z.... coordinate line number. Is it possible to have such functionality at LinuxCNC? Thanks in advance

What is the difference between the xyz settings and the safe height setting?

Typically one would manually jog the machine into position before restarting the program.

At the moment there is no way to start work from scratch of the workpiece from the selected line. G54 (x0,y0,z0) Start line number, lifting the cutter to a given safe height, starting the spindle, pause for 5 seconds, the tool goes to the coordinates of the selected line and lowers along the z, work is in progress. This is relevant after shutdown of the scheduled and emergency machine. Thanks for attention!

[justify]Hello! I want to add to the woodpecker from QtDragon hd master apply_stylesheetCombo. Please help to register correct signal slot. Thanks![/justify]

Try this (untested)

In designer change the slot name from 'cmb_stylesheet_curentindex()' to 'apply_stylesheet_clicked(int)'

change function in handler file to:

Thank you, now it's switching the stylesheet. But also default stylesheet doesn't apply. (please see screenshot)
Stylesheet .gss files are located in config directory. Linux CNC 2.8.2
 

See if this helps:

Cathed an error.
Fixed, and now it works
def apply_stylesheet_clicked(self, index):
        if self.w.cmb_stylesheet.currentText() == "As Loaded": return
        self.styleeditor.styleSheetCombo.setCurrentIndex(index)
        self.styleeditor.on_applyButton_clicked()     
Thank you so much!
    

Excellent!

Hello! How to register so that when choosing tab_mdi TabWidget interface went to mdi_mode. Thanks!