Сustomization QTvcp

cmorley
Offline
Platinum Member

4 years 10 months ago #228859 by cmorley

Replied by cmorley on topic Сustomization QTvcp

You would need to code a new widget or code the equivalent in the handler file.

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

4 years 10 months ago #228944 by hottabich

Replied by hottabich on topic Сustomization QTvcp

Alternatively, add the digital_7 (mono) font and add it to droLabel. Good, and as it is, a matter of taste.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

4 years 10 months ago #228972 by cmorley

Replied by cmorley on topic Сustomization QTvcp

I didn't know there was on - very nice!

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

4 years 9 months ago #231423 by hottabich

Replied by hottabich on topic Сustomization QTvcp

After updating linuxcnc 2.9, an error appeared when opening the interface as in the screenshot. Can this be fixed somehow without the help of a designer?

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

4 years 9 months ago #231442 by cmorley

Replied by cmorley on topic Сustomization QTvcp

you could use a text editor to edit the ui file.
Looks like the file simple_widgets needs an update too.

change in to print("false command")

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

4 years 9 months ago #231447 by hottabich

Replied by hottabich on topic Сustomization QTvcp

In the designer, if the python command option is selected for the button, then the false_python_cmd_string field should be empty. I fixed one button and everything works. Thank you so much for the advice.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

4 years 9 months ago #231516 by cmorley

Replied by cmorley on topic Сustomization QTvcp

excellent. I will fix the action button print statement thanks.

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

4 years 8 months ago #234589 by hottabich

Replied by hottabich on topic Сustomization QTvcp

After updating linuxcnc 2.9.0 pre. does not work
Pause Spindle function. Error as in the screenshot.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

4 years 8 months ago #234617 by cmorley

Replied by cmorley on topic Сustomization QTvcp

Ok I pushed the fix to master.
Please let me know if that fixes it.
Thanks

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

4 years 8 months ago #234631 by hottabich

Replied by hottabich on topic Сustomization QTvcp

cmorley wrote:
Ok I pushed the fix to master.
Please let me know if that fixes it.
Thanks

There is no error but there is no spindle stop either. And also Hal Show does not open.

Please Log in to join the conversation.

Time to create page: 0.187 seconds