Сustomization QTvcp

More
4 years 3 months ago #247718 by hottabich
Replied by hottabich on topic Сustomization QTvcp
SUBROUTINE_PATH = /home/jura/linuxcnc/nc_files/probe/basic_probe/macros:/home/jura/linuxcnc/nc_files/examples/remap-subroutines:/home/jura/linuxcnc/nc_files/remap_lib. Can't see stdglue.

Please Log in to join the conversation.

More
4 years 3 months ago #247742 by cmorley
Replied by cmorley on topic Сustomization QTvcp
try:
/home/jura/linuxcnc/nc_files/remap_lib/python_stdglue

Please Log in to join the conversation.

More
4 years 3 months ago #247953 by hottabich
Replied by hottabich on topic Сustomization QTvcp

try:
/home/jura/linuxcnc/nc_files/remap_lib/python_stdglue
It did not help. The error disappears if you replace the stdglue.py file from the bottom up as in the screenshot.
Thank you!
 

Please Log in to join the conversation.

More
4 years 3 months ago #247986 by cmorley
Replied by cmorley on topic Сustomization QTvcp
The problem I think is python_stdglue vrs python-stdglue

But adding the file to the configuration folder works too.

Please Log in to join the conversation.

More
4 years 3 months ago #248005 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Widgets won't open in designer after update. How to fix it? Thank you!

Please Log in to join the conversation.

More
4 years 3 months ago #248008 by cmorley
Replied by cmorley on topic Сustomization QTvcp
I pushed the fix just now. Thank you.

Please Log in to join the conversation.

More
4 years 3 months ago #248053 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Just updated linuxcnc no widgets.

Please Log in to join the conversation.

More
4 years 3 months ago #248060 by cmorley
Replied by cmorley on topic Сustomization QTvcp
can you post the terminal printout?

Please Log in to join the conversation.

More
4 years 3 months ago #248066 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Here you are.

Please Log in to join the conversation.

More
4 years 3 months ago #248068 by cmorley
Replied by cmorley on topic Сustomization QTvcp
I guess the updates haven't come through in master yet then.
here is the code if you would like to edit yours locally:

github.com/LinuxCNC/linuxcnc/blob/master...vcp/qt_istat.py#L112

Please Log in to join the conversation.

Time to create page: 0.167 seconds
Powered by Kunena Forum