Code:
def btn_pause_spindle_clicked(self, state):
eofsets = self.w.chk_eoffsets.isChecked()
if eofsets:
self.w.action_pause.setEnabled(not state)
self.w.action_step.setEnabled(not state)
if state:
# set external offsets to lift spindle
self.h['eoffset-enable'] = self.w.chk_eoffsets.isChecked()
fval = float(self.w.lineEdit_eoffset_count.text())
self.h['eoffset-spindle-count'] = int(fval)
self.w.spindle_eoffset_value.setText(self.w.lineEdit_eoffset_count.text())
self.h['spindle-inhibit'] = True
#self.w.btn_enable_comp.setChecked(False)
#self.w.widget_zaxis_offset.hide()
if not QHAL.hal.component_exists("z_level_compensation"):
self.add_status("Z level compensation HAL component not loaded", CRITICAL)
return
#self.h['comp-on'] = False
else:
self.h['eoffset-spindle-count'] = 0
self.w.spindle_eoffset_value.setText('0')
#self.h['eoffset-clear'] = True
self.h['spindle-inhibit'] = False
if STATUS.is_auto_running():
# instantiate warning box
info = "Wait for spindle at speed signal before resuming"
mess = {'NAME':'MESSAGE', 'ICON':'WARNING',
'ID':'_wait_resume_', 'MESSAGE':'CAUTION',
'NONBLOCKING':'True', 'MORE':info, 'TYPE':'OK'}
ACTION.CALL_DIALOG(mess)
It is necessary to enter a delay for lowering the spindle ( G4 P5) or lowering after the OK dialog. Thank you for your attention.
