Сustomization QTvcp

More
5 years 9 months ago #196901 by tommieh
Replied by tommieh on topic Сustomization QTvcp
Chris, I tried your new update for Fcode.
Works great, even in MDI the F-code is now shown.
Excellent, thanks for that.

Please Log in to join the conversation.

More
5 years 9 months ago #196916 by cmorley
Replied by cmorley on topic Сustomization QTvcp
Excellent!!

Please Log in to join the conversation.

More
5 years 9 months ago #197102 by tommieh
Replied by tommieh on topic Сustomization QTvcp
I'm using scroll buttons in QTabWidget, as I'm running out of screen space.
The scroll button arrows work, but are a little small for a touch screen to be finger touched.
Is there a way to make them larger?

Thanks

Please Log in to join the conversation.

More
5 years 9 months ago #197108 by phillc54
Replied by phillc54 on topic Сustomization QTvcp
Some styleshhet examples here:

doc.qt.io/qt-5/stylesheet-examples.html#customizing-qscrollbar

Please Log in to join the conversation.

More
5 years 9 months ago #197109 by tommieh
Replied by tommieh on topic Сustomization QTvcp
That's great, thanks

Please Log in to join the conversation.

More
5 years 9 months ago #197116 by tommieh
Replied by tommieh on topic Сustomization QTvcp
I found that these scroll buttons are called "scroller".
If I change it to say:
QTabBar::scroller { width: 40 px; }
what happens is the right scroller overlaps the left scroller.

If I make it say 10 px, then there's a gap between the left and right scroller.
I cannot find any reference on how to make them both bigger.

Please Log in to join the conversation.

More
5 years 9 months ago #197137 by hottabich
Replied by hottabich on topic Сustomization QTvcp
If there is room, add two buttons like the screenshot for QTabWidget.

Please Log in to join the conversation.

More
5 years 9 months ago #197166 by cmorley
Replied by cmorley on topic Сustomization QTvcp
You could even take Hottabich's idea further - use a stacked widet and put a label and two buttons above it - basically make your own tab widget.

Hottabich you interested in donating one of your screen to linuxcnc? I was thinking the X1/dragon combo one - do you call that one woodpecker too?

Please Log in to join the conversation.

More
5 years 9 months ago #197200 by tommieh
Replied by tommieh on topic Сustomization QTvcp
Thanks Hottabich and Chris,

It would be great for Hottabich to share his UI and _handler, I think that would be good material for learning and to find out on how to do things.
And we could learn a bit of Russian ;-)

Please Log in to join the conversation.

More
5 years 9 months ago #197216 by hottabich
Replied by hottabich on topic Сustomization QTvcp
What interface do you specifically mean? There are six of them on YouTube, which one?

Please Log in to join the conversation.

Time to create page: 0.188 seconds
Powered by Kunena Forum