Qtlathe

More
6 years 4 months ago #172218 by cmorley
Replied by cmorley on topic Qtlathe
the y2 action button's property, 'view_type_string' has not been set to Y2 - it is set to P

when set to Y2 it works as desired.

Please Log in to join the conversation.

More
6 years 4 months ago #172221 by hottabich
Replied by hottabich on topic Qtlathe
Thanks for the help. Archive updated.

Please Log in to join the conversation.

More
6 years 4 months ago #172265 by cmorley
Replied by cmorley on topic Qtlathe
While your modifications have moved away from the original intentions, It looks nice and is more functional for screen-only control.
It also fits well with qtdragon's style.
If you wish to develop it more I would include it in linuxcnc.

Chris

Please Log in to join the conversation.

More
6 years 4 months ago #172269 by hottabich
Replied by hottabich on topic Qtlathe
Thank! If possible, include it in linuxcnc. But you understand that without you I won’t do anything.
I’ll bother you step by step to make it work. Here, almost everything is taken from QtDragon. This is your work and Jim.

Please Log in to join the conversation.

More
6 years 4 months ago #172270 by cmorley
Replied by cmorley on topic Qtlathe
your questions, bug reports and ideas push the development of qtvcp/linuxcnc.
We all play our part.

Chris

Please Log in to join the conversation.

More
6 years 4 months ago #172299 by hottabich
Replied by hottabich on topic Qtlathe
I have many questions, I will ask one by one. Here is the macro_tab error. And if you close the error, the interface closes.

Please Log in to join the conversation.

More
6 years 4 months ago #172332 by cmorley
Replied by cmorley on topic Qtlathe
That is a strange bug. I guess I haven't tested the plain macro widget in a while. The dialog widget seems to work fine.
Working on it.

Please Log in to join the conversation.

More
6 years 4 months ago #172372 by hottabich
Replied by hottabich on topic Qtlathe
I improved my work a bit here.

Please Log in to join the conversation.

More
6 years 4 months ago #172413 by cmorley
Replied by cmorley on topic Qtlathe
screenoptions: deselect the macrotab dialog.

Then the error goes away

Please Log in to join the conversation.

More
6 years 4 months ago #172598 by hottabich
Replied by hottabich on topic Qtlathe
Thanks fixed. F5- removed. How to add mm / inс mapping with conversion of speed of movement.
Reload file do not need? Position DTG? It’s good to add to the mm / inc, inc / mm calculator.
Remove Shutdown at Start. Sim Panel for what?

Please Log in to join the conversation.

Time to create page: 0.103 seconds
Powered by Kunena Forum