Profile for gzcwnk

Offline

User Type: User
Rank: Premium Member

Register Date: 11 Jan 2016
Last login: 4 years 11 months ago
Time Zone: UTC +0:00
Local Time: 10:01

Posts: 83
Profile views: 7

Gender: Unknown
Birthdate: Unknown

gzcwnk's recent posts (83 messages )

	Subject	Replies / Views	Last Post

	How do I zero the machine after moving to toe X0, Y0, Z0? Category: General LinuxCNC Questions Topic started 4 years 11 months ago, by gzcwnk Last Post 4 years 11 months ago by andypugh	Replies:3 Views:1352	Last Post by andypugh 4 years 11 months ago
	Basic configuration for a chinese 6040 cnc router please Category: Basic Configuration Topic started 7 years 10 months ago, by gzcwnk Last Post 5 years 7 months ago by gzcwnk 1 2 3 4	Replies:39 Views:20k	Last Post by gzcwnk 5 years 7 months ago
	Personal fusion360 edition and LinuxCNC new error Category: General LinuxCNC Questions Topic started 6 years 3 weeks ago, by gzcwnk Last Post 6 years 3 weeks ago by gaston48	Replies:3 Views:1587	Last Post by gaston48 6 years 3 weeks ago
	Personal fusion360 edition and LinuxCNC new error Category: General LinuxCNC Questions Topic started 6 years 3 weeks ago, by gzcwnk Last Post 6 years 3 weeks ago by gaston48	Replies:3 Views:1587	Last Post by gaston48 6 years 3 weeks ago
	I have this other BoB 5 axis board also screenshots of stepconf for it please? Category: StepConf Wizard Topic started 6 years 5 months ago, by gzcwnk Last Post 6 years 5 months ago by tommylight	Replies:2 Views:2373	Last Post by tommylight 6 years 5 months ago
	5 axis baord screenshots of stepconf for it please? Category: StepConf Wizard Topic started 6 years 5 months ago, by gzcwnk Last Post 6 years 5 months ago by andypugh	Replies:1 Views:1789	Last Post by andypugh 6 years 5 months ago
	Error on start unexpected realtime delay task 0 or task1 Category: General LinuxCNC Questions Topic started 6 years 5 months ago, by gzcwnk Last Post 6 years 5 months ago by gzcwnk 1 2	Replies:10 Views:3014	Last Post by gzcwnk 6 years 5 months ago
	parallel port no longer detected by LinuxCNC and neither by dmesg, failed? Category: General LinuxCNC Questions Topic started 6 years 5 months ago, by gzcwnk Last Post 6 years 5 months ago by gzcwnk 1 2	Replies:11 Views:2903	Last Post by gzcwnk 6 years 5 months ago
	Error on start unexpected realtime delay task 0 or task1 Category: General LinuxCNC Questions Topic started 6 years 5 months ago, by gzcwnk Last Post 6 years 5 months ago by gzcwnk 1 2	Replies:10 Views:3014	Last Post by gzcwnk 6 years 5 months ago
	Error on start unexpected realtime delay task 0 or task1 Category: General LinuxCNC Questions Topic started 6 years 5 months ago, by gzcwnk Last Post 6 years 5 months ago by gzcwnk 1 2	Replies:10 Views:3014	Last Post by gzcwnk 6 years 5 months ago

Time to create page: 0.300 seconds

Powered by Kunena Forum