LinuxCNC Features - a kind of NGCGUI

Thinking further of Lathe subroutines...

I have no experience working with them...
Are there any standard subroutines for lathe machining?

What about multipass cutting?

Is there something like G71 that I've found in HAAS lathe manual in LinuxCNC?

have no experience working with them...
Are there any standard subroutines for lathe machining?

What about multipass cutting?

Is there something like G71 that I've found in HAAS lathe manual in LinuxCNC?

John, Arceye and others have posted some great ones in the ngcgui section. Inside taper, Outside taper, Inside diameter, outside diameter. Multi pass. profile cutting etc.
In fact some of us use ngcgui for over 90% of what we do on a lathe.

Hey Chris,
I can see them now on my home office computer, but earlier today they did not show up on a work computer. Odd.
Probably because I do not have Flash player installed there.

Rick G

Nick wrote: I have no experience working with them...
Are there any standard subroutines for lathe machining?

Have you seen my (no G-code) system?
www.linuxcnc.org/index.php/english/forum...0-lathe-macros#34357
(Feel free to use, ignore, alter, improve)

Pages 52 - 113 in here, I believe - PDF

andypugh wrote:

Nick wrote: I have no experience working with them...
Are there any standard subroutines for lathe machining?

Have you seen my (no G-code) system?
www.linuxcnc.org/index.php/english/forum...0-lathe-macros#34357
(Feel free to use, ignore, alter, improve)

Thank you! That looks amazing! I'll try to find something useful there !

Zahnrad Kopf wrote: Pages 52 - 113 in here, I believe - PDF

Are that Gcodes supported by LinuxCNC?
I have not found them in Gcode reference from LinuxCNC...

Nick wrote:

Zahnrad Kopf wrote: Pages 52 - 113 in here, I believe - PDF

Are that Gcodes supported by LinuxCNC?
I have not found them in Gcode reference from LinuxCNC...

No, that has nothing to do with LinuxCNC, as you know Nick only the G codes in the LinuxCNC manual are supported.

JT