Need help with Parallel Port Setup. (ESTOP issue)
16 Sep 2020 07:43 - 16 Sep 2020 07:44 #182405
by Aciera
Replied by Aciera on topic Need help with Parallel Port Setup. (ESTOP issue)
So as soon as you change these lines
to this
#net estop-out => iocontrol.0.emc-enable-in
net emc-enable <= parport.0.pin-13-in-not => iocontrol.0.emc-enable-in
you get the error?
[edit]
Have you checked parport.0.pin-13-in with the hal-scope?
Warning: Spoiler!
net estop-out => iocontrol.0.emc-enable-in
#net emc-enable <= parport.0.pin-13-in-not => iocontrol.0.emc-enable-in
#net emc-enable <= parport.0.pin-13-in-not => iocontrol.0.emc-enable-in
to this
Warning: Spoiler!
#net estop-out => iocontrol.0.emc-enable-in
net emc-enable <= parport.0.pin-13-in-not => iocontrol.0.emc-enable-in
you get the error?
[edit]
Have you checked parport.0.pin-13-in with the hal-scope?
Last edit: 16 Sep 2020 07:44 by Aciera.
The following user(s) said Thank You: shadab
Please Log in or Create an account to join the conversation.
16 Sep 2020 08:57 #182411
by shadab
Replied by shadab on topic Need help with Parallel Port Setup. (ESTOP issue)
Yeah I was getting the error. But I suspect it was because of the limit switches inputs. I configured them wrong so they were always actuating, it was not the ESTOP input error but because if limit switches always on, machine was always in STOP mode. Now it works.
Please Log in or Create an account to join the conversation.
16 Sep 2020 09:15 #182416
by Aciera
Replied by Aciera on topic Need help with Parallel Port Setup. (ESTOP issue)
Glad you got it working. Thanks for reporting back.
Please Log in or Create an account to join the conversation.
Moderators: cncbasher
Time to create page: 0.067 seconds