1. Hardware & Machines
  3. CNC Machines
  5. Plasma & Laser
  7. Stefan's plasma with toma_thc and Proma THC150

Stefan's plasma with toma_thc and Proma THC150

More
20 Aug 2019 08:13 #142559 by tommylight
Stefan's plasma with toma_thc and Proma THC150 was created by tommylight
Found this post by Stefan some days ago, it has a lot of information on setting a plasma machine using Proma Elektronika THC150 and toma_thc config.

cymbalukdesigns.com/knowledge-base/linux...lasma-configuration/

That same config now works also with THCAD and all motion controllers made by Mesa ( thank you PCW ), and it can generate ARCOK signal from THCAD without the need to wire it to THC/plasma ( thank you PhillC )

For new builds please use the new config made by PhillC named PlasmaC as it has much more features, to the point that it can compete with industrial controllers and surpas them.
Link
forum.linuxcnc.org/plasma-laser/35449-another-plasma-component

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 08:25 #142561 by thefabricator03
Replied by thefabricator03 on topic Stefan's plasma with toma_thc and Proma THC150

Found this post by Stefan some days ago, it has a lot of information on setting a plasma machine using Proma Elektronika THC150 and toma_thc config.

cymbalukdesigns.com/knowledge-base/linux...lasma-configuration/

That same config now works also with THCAD and all motion controllers made by Mesa ( thank you PCW ), and it can generate ARCOK signal from THCAD without the need to wire it to THC/plasma ( thank you PhillC )

For new builds please use the new config made by PhillC named PlasmaC as it has much more features, to the point that it can compete with industrial controllers and surpas them.
Link
forum.linuxcnc.org/plasma-laser/35449-another-plasma-component


Sorry Tom but I did not post that, Unless there is another Stefan floating around these parts I have missed.

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 09:25 #142566 by tommylight
Replied by tommylight on topic Stefan's plasma with toma_thc and Proma THC150
You are not Stefan Cymbaluk ???
:S

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 09:38 - 20 Aug 2019 09:39 #142568 by thefabricator03
Replied by thefabricator03 on topic Stefan's plasma with toma_thc and Proma THC150

You are not Stefan Cymbaluk ???
:S


Lol no but it sure is a great name. Ive never used a Proma or the Toma_thc config.

But that Stefan has a very well put together website, lots of great information. I will have to make my own to compete with him.
Last edit: 20 Aug 2019 09:39 by thefabricator03.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 10:28 #142571 by rodw
Replied by rodw on topic Stefan's plasma with toma_thc and Proma THC150

You are not Stefan Cymbaluk ???
:S


Tommy, just to be clear our Stefan is The Fabricator! :)
The following user(s) said Thank You: thefabricator03

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 10:55 #142578 by tommylight
Replied by tommylight on topic Stefan's plasma with toma_thc and Proma THC150
O how easy things get out of hand and take a fuzzy direction ! :)
I left out his name as it was in the link.
If i had put it in the title, none of this would have happened!
We do need some fun around here, we are all serious and stuff.
And i do agree that he has a nice web site with plenty of well explained info. He is a member of this forum, but i forgot his nic.
Now i'll go try to find another Stefan with a plasma cnc, more fun ! :)

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 10:58 #142583 by rodw
Replied by rodw on topic Stefan's plasma with toma_thc and Proma THC150
Tommy, I think I'll change my name to Stefan just to make your life hard!
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 13:24 #142593 by Clive S
Replied by Clive S on topic Stefan's plasma with toma_thc and Proma THC150

Tommy, I think I'll change my name to Stefan just to make your life hard!


And mine to Rod to really mess things up :woohoo:
The following user(s) said Thank You: tommylight, rodw

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 14:46 #142601 by pl7i92
Replied by pl7i92 on topic Stefan's plasma with toma_thc and Proma THC150
<- woudt like to throw his hat into the ring to
ROFL
as we only use toma eagle thc
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 17:06 #142623 by tommylight
Replied by tommylight on topic Stefan's plasma with toma_thc and Proma THC150

<- woudt like to throw his hat into the ring to
ROFL

Someone tripped on your hat and fell ! :)

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
  1. Hardware & Machines
  3. CNC Machines
  5. Plasma & Laser
  7. Stefan's plasma with toma_thc and Proma THC150
Time to create page: 0.092 seconds
Powered by Kunena Forum