Forum Menu

My Newb Plasma Table Attempted Build

More
5 years 7 months ago #202674 by phillc54
Replied by phillc54 on topic Filter Failed error after changing computer
How did you install LinuxCNC?

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #202676 by dvn4life1972
Replied by dvn4life1972 on topic Filter Failed error after changing computer
This time I did what it said initially in the Getting Linuxcnc doc.

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago - 5 years 7 months ago #202677 by phillc54
Replied by phillc54 on topic Filter Failed error after changing computer
So, it seems it is a package installation.
Try running the following commands in a terminal one by one:
You can copy/paste them.
Code:
cd ~/linuxcnc/configs/pats_v2 rm configurator.py rm materialverter.py rm pmx_test.py rm -rf test rm -rf wizards ln -s /usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/configurator.py ln -s /usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/materialverter.py ln -s /usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/pmx_test.py ln -s /usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/test ln -s /usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/wizards
Last edit: 5 years 7 months ago by phillc54.
The following user(s) said Thank You: dvn4life1972

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago - 5 years 7 months ago #202681 by snowgoer540
Replied by snowgoer540 on topic Filter Failed error after changing computer

phillc54 wrote: You can copy/paste them.


It wasn’t until very recently that I learned how to paste in a Linux terminal window without right clicking the mouse:

ctrl+shift+v

I learned in the DOS days :blush:

Similarly in Linux going back one directory is “CD ..” and not “CD..”

It’s the little things :)
Last edit: 5 years 7 months ago by snowgoer540.
The following user(s) said Thank You: dvn4life1972

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #202682 by dvn4life1972
Replied by dvn4life1972 on topic Filter Failed error after changing computer
I'll have to try that in the morning. Need to drive to my dad's and check up on him.
Thanks

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #202684 by rodw
Replied by rodw on topic My Newb Plasma Table Attempted Build
At a guess, you need to find the file M190 (however Phill does it) and change the permissions to execute on it as well.
The following user(s) said Thank You: dvn4life1972

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.547 seconds
Powered by Kunena Forum