QT plasmac conversion

20 Mar 2021 21:37 #203054 by snowgoer540

Replied by snowgoer540 on topic QT plasmac conversion

in the [TRAJ] and [DISPLAY] section, change DEFAULT_LINEAR_VELOCITY to 3.33

it is in machine units per second. So 200/60 = 3.33

The following user(s) said Thank You: wade956

Please Log in or Create an account to join the conversation.

20 Mar 2021 22:16 #203058 by wade956

Replied by wade956 on topic QT plasmac conversion

It's also looking like my THC is not adjusting anymore. I see the lights come on and off but the servo motor is not moving. Any suggestions?

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540

Time to create page: 0.108 seconds