Pierce height would exceed Z axis maximum safe height condition found while...

More
09 May 2022 04:58 #242353 by Daddio
Thanks everybody, that did the trick.  After adding the axis-position line I am up and running and error free.# ---JOINT ASSOCIATED WITH THE Z AXIS---
net plasmac:axis-position joint.3.pos-fb => plasmac.axis-z-position
The following user(s) said Thank You: phillc54, RNJFAB

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.056 seconds
Powered by Kunena Forum