Home and limit indicator
28 May 2023 02:42 #272307
by grijalvap
Home and limit indicator was created by grijalvap
Hi.
I'm wondering if it is posible to have a home and limit switch indicator in the QTplasmaC GUI.
may be the Jog butons can be set to red when the machine hits the home or limit switches.
I'm wondering if it is posible to have a home and limit switch indicator in the QTplasmaC GUI.
may be the Jog butons can be set to red when the machine hits the home or limit switches.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19106
- Thank you received: 6398
28 May 2023 10:39 #272327
by tommylight
Replied by tommylight on topic Home and limit indicator
It does show arrows in front of the DRO axis values, but still, it would be nice to have during testing and tuning.
From experience, i never needed them as the machines never hit limits during use, if all is set properly.
From experience, i never needed them as the machines never hit limits during use, if all is set properly.
Please Log in or Create an account to join the conversation.
28 May 2023 17:46 #272351
by rodw
I do think this is the right approach. Limits should never be hit. With shared home/limit switches, move off the home switch with a HOME_OFFSET during homing so the limit erroris not triggered when exiting homing.
Replied by rodw on topic Home and limit indicator
From experience, i never needed them as the machines never hit limits during use, if all is set properly.
I do think this is the right approach. Limits should never be hit. With shared home/limit switches, move off the home switch with a HOME_OFFSET during homing so the limit erroris not triggered when exiting homing.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Moderators: snowgoer540
Time to create page: 0.129 seconds