As far as Gcode goes, it was done in conversational, long gone.I am not sure which version I am running but it is probably at least 2yr old. BTW I would like to thank all who have been a part of the plasmac interface development, I came from Mach3 to Plasmac, it was like going from riding an oxcart to driving a Mercedes. It is so easy to run and to learn, in the old mach3 days I would have a random torch dive and estop, sometimes wading thru thousands of lines of gcode to figure out where to restart, now I rarely ever have a thc issue and if there is a problem its easy as pushing rewind. Plus a Bucket list of other things that are way superiour. I have several miles of cutting logged on by now and very few issues. Thanks again.
