PnP feeder

More
01 Jul 2020 04:20 - 01 Jul 2020 04:21 #173288 by Aciera
Replied by Aciera on topic PnP feeder
I see. I don't have any experience using PnP but it looks very interesting particularly the machine vision.

the biggest problem that I see with OpenPnP is the fact that it relies on Windows 10


Regarding openPNP, there are also Downloads for Mac OSX and Linux. openpnp.org/downloads/
Last edit: 01 Jul 2020 04:21 by Aciera.
The following user(s) said Thank You: tommylight, my1987toyota

Please Log in or Create an account to join the conversation.

More
01 Jul 2020 17:36 #173324 by my1987toyota
Replied by my1987toyota on topic PnP feeder
I stand corrected.

Please Log in or Create an account to join the conversation.

More
23 Jul 2020 01:46 - 15 Apr 2021 14:00 #175444 by my1987toyota
Replied by my1987toyota on topic PnP feeder
For now I will be continuing this build in the "Show Your Stuff section" look for " Manncorp ECM93 Pick and Place"
I will be posting update videos their as I make progress on the project.
Last edit: 15 Apr 2021 14:00 by andypugh.

Please Log in or Create an account to join the conversation.

More
23 Jul 2020 11:35 #175517 by tommylight
Replied by tommylight on topic PnP feeder

I stand corrected.

+1

Please Log in or Create an account to join the conversation.

More
23 Jul 2020 11:36 #175518 by tommylight
Replied by tommylight on topic PnP feeder
Eagerly waiting there for updates.

Please Log in or Create an account to join the conversation.

More
15 Apr 2021 13:58 #206010 by andypugh
Replied by andypugh on topic PnP feeder
I recently bought a PnP myself, and created a new category for them (because I can). I have moved this there.

The feeders in the photos appear to be identical to mine.

My plan is to (probably) use a Mesa 7i96 for the stepper motors + a 7i71 to operate the (many) solenoids. If 300mA is not sufficient then the 7i66 will be the choice (2A drive current) but with 24 channels that is only just enough for 20 feeders, vacuum and head up-down.
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

More
02 May 2021 15:54 #207645 by my1987toyota
Replied by my1987toyota on topic PnP feeder

I recently bought a PnP myself, and created a new category for them (because I can). I have moved this there.



Thank you Andy . Maybe this will motivate me to hurry up and get back to mine.
And I hope your project goes well as well.

Please Log in or Create an account to join the conversation.

More
04 Jul 2021 00:59 #213633 by my1987toyota
Replied by my1987toyota on topic PnP feeder
So I have been back at it again with the PnP. For now it has been integrating an MPG. A CNC machine no mater what it is
just don't feel like a CNC without an MPG.
The following user(s) said Thank You: rodw

Please Log in or Create an account to join the conversation.

More
05 Jul 2021 03:20 #213739 by my1987toyota
Replied by my1987toyota on topic PnP feeder
I Just ordered a 7i71. Those 48 output channels will sure come in handy. I wonder how many additional feeders I can utilize?
OK andypugh you will probably win but. Race ya.

Please Log in or Create an account to join the conversation.

More
05 Jul 2021 22:33 #213798 by andypugh
Replied by andypugh on topic PnP feeder

OK andypugh you will probably win but. Race ya.

I haven't even plugged mine in yet. It turned up on eBay at a time when I am not short of projects, and don't really need a PnP. 
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

Time to create page: 0.114 seconds
Powered by Kunena Forum