Powermill LinuxCNC Post

Hi
we got a Education Center Powermill Licence
but there is no Postprocessor include in the Licensing
does anyone know a Guide fo setting up a Postprocessor
the Edit tool is included and 3D XYZ workes fine a 4th (5th) axis wounded be great gift

Hello, I had some experiance with creating postrpocessor for 5 axis PowerMill 2017 a year ago.
I worked in such way:
I found default postprocessor for 5 axis in internet and changed it correspondly to my porposes.
As for now I don't have such Posts because I'm in business trip and not near my PC.

I suppose that PowerMill developers should help you to creat post for your machine if you buy this program

if possibel can you share your post here to get it modyfied as the editor is on the system it shoudt not be that hard to get to it

woudt be a great advanced to the Education center to get a Running 5Axis CAD/CAM/CNC system

Thank You

Now I haven't such possibility because I'm in buisiness trip. An I will be here aprox. a month.
As I said, I found 5-axis post in internet.

But before you start to change your post, you need to make your virtual cnc machine for PowerMill. PostProc takes all needed information from this machine to work.

i got Time until Feb 2021 so time is no Factor to learn how to do and setup the Virtuell machine
i need a start point where to put the STL files of the Machine parts and position them

if possible can you write a rundown

What exactly do you need to write?

1) You need to make virtual model of your cnc machine and to adjust all axes.
2) You need to import (connect) your model to postprocessor and to modify post for your special cases.
Then your can work with it and to make G-codes.

Posts for mach3 also suitable.

this is Clear to me
But where is the File that holds the Connection to the Virtual STL files
i did not find any Machine in the Installation of Powermill
This is my Problem I got all Axis connected Parts Separated and Downgrated to get a Sharp clear
Machine Model
i did add the STL files here
if i setup a machine / RENAME from a Example it ads about 100files pmlet and a MDdata folder
there is a File that seams to hold the geometry as a XML but no guide or info on how this is syntaxed

THANK you for your help
If there where a Example im shure i coudt do it
and safe the School lots of money as they fine 1kEUR Post costs

From your last messege I understood that you are know nothing about PowerMill post processors and their machines.
Also I know nothing about your problem and your machine, except that you need 5axis post.
Try to read PowerMill documentation to understend right way:
MTD user guide
Build Robot simulation in Powermill

PS
PowerMill doesn't work with stl-files, only *.dmt

Thank you Sir i will make DMT right away and start reading the guide