SolidWorks for makers, post processor for LinuxCNC?

The above link is to a login page, so why is that posted here?
I see no reason for it as this is open source forum, while that is not open source.

tommylight wrote:

The above link is to a login page, so why is that posted here?
I see no reason for it as this is open source forum, while that is not open source.

The link takes you to a solidworks Makers page with a postprocessor. I guess if you are using Solidworks you might have a use for it and the required login.

If the NC Shop Floor program has some default post processors, try any of them designed for Fanuc controls. Those have been working for me on different CAM software so maybe it will work for you. Sometimes you need to edit something in the code but it's usually just in the setup code or similar.