QtPyVCP Mill Touch V6

Donb9261
Offline
Elite Member

6 years 10 months ago #152896 by Donb9261

Replied by Donb9261 on topic QtPyVCP Mill Touch V6

Just tested probe_basic M6 function. Set T 1 and press M6. It works. So, I am at a loss. It seems to send the T#<main_tool_number> M6 fine. Else the UI would error on the T call. :unsure:

I will test some of the others to see if it is just program.run:line that is effected and walk it back from there.

Please Log in or Create an account to join the conversation.

hottabich
Offline
Platinum Member

6 years 10 months ago - 6 years 10 months ago #152898 by hottabich

Replied by hottabich on topic QtPyVCP Mill Touch V6

How to unlock spindle speed adjustment during program execution?

Last edit: 6 years 10 months ago by hottabich.

Please Log in or Create an account to join the conversation.

Moderators: KCJ, Lcvette

Time to create page: 0.044 seconds