QtPyVCP Plasma GUI
04 May 2019 21:24 #132773
by BigJohnT
QtPyVCP Plasma GUI was created by BigJohnT
I started working on my QtPyVCP Plasma GUI and got a good start on nesting part subroutines this morning.
JT
JT
Please Log in or Create an account to join the conversation.
04 May 2019 21:59 #132778
by BigJohnT
Replied by BigJohnT on topic QtPyVCP Plasma GUI
I added an offset for the even rows to get better nesting.
JT
JT
The following user(s) said Thank You: chimeno, tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
- Offline
- Moderator
-
Less
More
- Posts: 19300
- Thank you received: 6462
05 May 2019 03:11 #132804
by tommylight
Replied by tommylight on topic QtPyVCP Plasma GUI
Very nice, indeed !
Thank you.
Thank you.
Please Log in or Create an account to join the conversation.
02 Jun 2019 10:36 #135624
by BigJohnT
Replied by BigJohnT on topic QtPyVCP Plasma GUI
I've added part creation to my QtPyVCP plasma GUI so I can create a part then nest them and cut them out all in a few seconds. I can also test the code without firing the torch.
JT
JT
The following user(s) said Thank You: chimeno, tommylight
Please Log in or Create an account to join the conversation.
02 Jun 2019 15:07 #135638
by AgentWD40
Replied by AgentWD40 on topic QtPyVCP Plasma GUI
Very cool! I'm curious, does this integrate with plasmac? Or have you written your own THC and things?
Please Log in or Create an account to join the conversation.
03 Jun 2019 11:51 - 03 Jun 2019 11:53 #135737
by BigJohnT
Replied by BigJohnT on topic QtPyVCP Plasma GUI
I just use the thc component, I have no idea what plasmac is or does.
JT
JT
Last edit: 03 Jun 2019 11:53 by BigJohnT.
Please Log in or Create an account to join the conversation.
03 Jun 2019 12:47 #135743
by rodw
This one. Phill is developing
forum.linuxcnc.org/plasma-laser/35449-another-plasma-component
Its gathering a bit of a following,,,
Replied by rodw on topic QtPyVCP Plasma GUI
I just use the thc component, I have no idea what plasmac is or does.
JT
This one. Phill is developing
forum.linuxcnc.org/plasma-laser/35449-another-plasma-component
Its gathering a bit of a following,,,
Please Log in or Create an account to join the conversation.
03 Jun 2019 13:38 #135746
by pl7i92
Replied by pl7i92 on topic QtPyVCP Plasma GUI
in this days everyone is going in different direction
noone puts it all together
Plasmac revers run,mesting woudt be good to have in qtvcp envirerment
noone puts it all together
Plasmac revers run,mesting woudt be good to have in qtvcp envirerment
Please Log in or Create an account to join the conversation.
03 Jun 2019 15:55 #135757
by BigJohnT
I don't use qtvcp, I use QtPyVCP and all the stuff we do in QtPyVCP is fully shareable without having to clone LinxuCNC.
Reverse run is a branch off of Master that is broken at the moment if I recall correctly.
JT
Replied by BigJohnT on topic QtPyVCP Plasma GUI
in this days everyone is going in different direction
noone puts it all together
Plasmac revers run,mesting woudt be good to have in qtvcp envirerment
I don't use qtvcp, I use QtPyVCP and all the stuff we do in QtPyVCP is fully shareable without having to clone LinxuCNC.
Reverse run is a branch off of Master that is broken at the moment if I recall correctly.
JT
Please Log in or Create an account to join the conversation.
03 Jun 2019 16:03 - 03 Jun 2019 17:07 #135758
by BigJohnT
I'm familiar with the thread but don't have time to read 96 pages of discussion while it is being developed. Time is short for me at the moment and I have to skip most of the posts.
JT
Replied by BigJohnT on topic QtPyVCP Plasma GUI
I just use the thc component, I have no idea what plasmac is or does.
JT
This one. Phill is developing
forum.linuxcnc.org/plasma-laser/35449-another-plasma-component
Its gathering a bit of a following,,,
I'm familiar with the thread but don't have time to read 96 pages of discussion while it is being developed. Time is short for me at the moment and I have to skip most of the posts.
JT
Last edit: 03 Jun 2019 17:07 by BigJohnT.
Please Log in or Create an account to join the conversation.
Time to create page: 0.093 seconds