Set work Offsets

Thank you for your reply.

I am using BT30 tooling with an ATC spindle. (I say using, but really I haven't used anything since I can't figure out the tool offsets and work offsets)

I understand how to perform these in theory; use the spindle nose and work table as a reference, etc. I just don't understand how to practically assign these values into LinuxCNC probe_basic. Likewise, I understand how to use my Hamier in theory, but not in pratice since I have never before in my life operated a CNC control.

ah, you are completely new, ok...

Entering the offset into probe basic is fairly intuitive, you double click in the tool table and enter the offset value, press enter. now the table must be saved and reloaded via the buttons at the bottom of the tool table.

As for learning cnc in general, that is a topic best learned from reading and watching youtube videos of which there are many that would be easier than someone custom typing up a manual. give youtube a search for the specific items you are unsure of.