Problem at the first start
- Blume
- Offline
- Senior Member
-
Less
More
- Posts: 42
- Thank you received: 2
24 Mar 2024 18:59 - 24 Mar 2024 19:02 #296638
by Blume
Hi. Have a problem at the first start. Here is the report file. Hope that you can help me.
Problem at the first start was created by Blume
Hi. Have a problem at the first start. Here is the report file. Hope that you can help me.
Attachments:
Last edit: 24 Mar 2024 19:02 by Blume.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19798
- Thank you received: 6694
25 Mar 2024 01:08 #296666
by tommylight
Replied by tommylight on topic Problem at the first start
I would change the 5V power supply powering the Mesa 7i76E board, find a really good one.
Please Log in or Create an account to join the conversation.
- PCW
-
- Away
- Moderator
-
Less
More
- Posts: 18275
- Thank you received: 4979
25 Mar 2024 02:02 #296675
by PCW
Replied by PCW on topic Problem at the first start
The actual error is this
/home/cnc/linuxcnc/configs/ProbeBasic/custom_postgui.hal:6: Pin 'halui.axis.z.minus' was already linked to signal 'jog-z-neg'
Which is a hal error
Also you have a watchdog bite which means a real time issue on the host PC that needs to be resolved
/home/cnc/linuxcnc/configs/ProbeBasic/custom_postgui.hal:6: Pin 'halui.axis.z.minus' was already linked to signal 'jog-z-neg'
Which is a hal error
Also you have a watchdog bite which means a real time issue on the host PC that needs to be resolved
Please Log in or Create an account to join the conversation.
Moderators: KCJ, Lcvette
Time to create page: 0.053 seconds