Probe Basic do not start

Hi, changed my Config. I get an error with the path from this. But i attached a screenshoot with my folder. 

FileNotFoundError: [Errno 2] Datei oder Verzeichnis nicht gefunden: 'user_tabs/

USER_TABS_PATH = user_tabs/             # REQUIRED Setting for Probe Basic
USER_BUTTONS_PATH = user_buttons/       # REQUIRED Setting for Probe Basic

die fehlermeldung sagt dir doch genau was los ist... dir fehlen diese 2 ordner in deinem config ordner.... erstelle diese und fertig

Copy those folders from the sim per the docs

Hi, my fault was that i copy the foldes from the folder /machine_setup_files
know i take the folders from the sim folder.
second step i delete all # REQUIRED Setting for Probe Basic in the ini file.

Know i get the start logo and a new error . 
I think something goes wrong with my postgui.hal but i dont know what. 

[qtpyvcp.app.launcher][[36mINFO[0m]  Loading POSTGUI_HALFILE: /home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal (launcher.py:98)
not: already exists
/home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal:5: waitpid failed /usr/bin/rtapi_app not
/home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal:5: /usr/bin/rtapi_app exited without becoming ready
/home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal:5: insmod for not failed, returned -1
Failed to load POSTGUI_HALFILE with error: 1
 

[qtpyvcp.app.launcher][[36mINFO[0m]  Loading POSTGUI_HALFILE: /home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal (launcher.py:98)
not: already exists

not
^^^ already exists, looks like maybe you are trying to load it twice in different locations

here, check over all of your hal for duplications, a realtime component must only be loaded once in a single hal file, preferably the main hal since it is loaded first.