Gui message while homing with shared home/limit swiches

I think this is actually a bug in the QtDragon GUI.

Moved to the Qtvcp section so maybe @cmorley picks it up.

That seems likely since there must be 1000's of LinuxCNC installations using
shared home/limits and this is the first time I've seen this complaint.

just FYI, I moved this configuration off the RPI-4 onto a new computer (fresh installation from the released ISO) and still get the same. Figures I would be the only one to have this "issue". Am I the only one using QtDragon? cant be, as it is a very cool GUI.

rubes wrote:

Am I the only one using QtDragon? 
 

No. You are only one using your config.

Aciera wrote:

I think this is actually a bug in the QtDragon GUI.

Moved to the Qtvcp section so maybe @cmorley picks it up.

If it is, its a new one, I had no problems with a single home/limit switcch. Feel free to review my hal and ini files
github.com/rodw-au/vmnmillqt/tree/main

It's more likely the bogus message comes from hal_glib library watching the limits switches without knowing about shared homing use.