Vielen Dank,

das teil ist gefräst, alles gut.

danke karlhe

Hallo, ich habe das noch einmal nachvollzogen.
Bearbeitungsbildschirm wieder herstellen:
taste strg und taste alt  drücken, dann pfeiltasten li bzw. rechts
tschüß
karlhe


 

Yeah I got it casting with the quadro card installed and plugged into that card it does work up to the GRUB menu then turns off during boot.

A longer cable was definitely my first thought but it's still one more thing to trip over and need to remember any time I move the machine or anything.

Thanks for the heads up about the Nvidia driver. Glad I didn't try it.

The wireless setup does display the GRUB menu when plugged into the quadro card, just not when plugged into the Optiplex 9020 (or whatever it is) internal graphics port.
I'll try the "nomodeset" test.

If that doesn't work I'm still torn on whether it would be worth getting a cheap GPU with HDMI to try.

I am also considering trying to attach a smaller monitor to my machine. At the time a bigger monitor separate made sense but maybe I could find a way to attach an arm and a 12-15 ish inch monitor in a way that wasn't too obnoxious.

Of course then that gets me wondering.
Is there any sub $100ish touchscreen in that size range that would have 1920x1080 for Probe Basic that would be relatively plug and play?

i had the same problem, to overcome this i used home offset=0 and added an offset in pos comand

Der Bearbeitungsbildschirm ist nicht sichtbar, ich fräse gerade ein teil.

Ich kann kein halt eingeben, keinen button drücken..

den Fräsvorgang abbrechen möchte ich aber nicht.

Hallo,
 ich habe den Bearbeitungsbildschirm weggeschaltet.

Wie kann ich den wieder sichtbar machen? die maschine läuft..

Dnke für Eure hilfe..

Karlhe

What is the proper way to send a hal and ini file?

On what we run on the actual machines we have G12.1 it was an old patch, never fully made it into master, but is much better than what we have now in master, G12.1 Pxx you can have hundreds of worlds switch on the fly, should I made the port? I don't think MOVJ MOVL is realistic, but G12.1 Pxx totally feasible, I already use it extensively.

it is still a switch but nothing moves and can be done on the fly, does that work? or you are looking for something else?

Hi grandixximo,
Nicely laid out plan.
There is one more nuance for a motion planner that should be considered when looking at a complete re-write for linuxcnc motion planner internals.
For operating robots, some moves are given in joint space and some are given in cartesian space.
For most commercial robots, MOVJ and MOVL/MOVC are separate commands for joint space v/s cartesian space commands.
The MOV* commands also have a sync parameter which chooses if all the axes should start and finish at the same time (rapid move) OR should the motion start and finish at the same time.

When switching between MOVJ and MOVL there is no need to specify the a Kinematics switch. I am guessing they use 2 separate planners and the switch is made at stand still i.e., zero vel and accel for all joints and axes.

Having this ability for multiple on-the-fly switchable planners will make Linuxcnc much more useful for operating robots.

The only reason to bring this up in the conversation regarding jerk limiting is the planner re-write could consider these types of use cases from ground up.
-automata

New PR github.com/LinuxCNC/linuxcnc/pull/3744
Should be able to get new build artifacts, not sure, or you can build my fork
Need some help with testing, thanks!