Mazak Micro Slant 15 Retrofit
- smc.collins
- Offline
- Platinum Member
-
Less
More
- Posts: 676
- Thank you received: 117
05 Jul 2023 02:56 #274801
by smc.collins
Replied by smc.collins on topic Mazak Micro Slant 15 Retrofit
Tommy, I have a machine tool ussd parts seller ,machine dismantler close to me.
post up the info on your chuck, I'll call around
post up the info on your chuck, I'll call around
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
Less
More
- Posts: 19188
- Thank you received: 6432
12 Jul 2023 00:28 #275246
by tommylight
Replied by tommylight on topic Mazak Micro Slant 15 Retrofit
It has a plate with chuck info on it, i will take a picture and upload it here, thank you.
-
Still waiting for some good encoder cable, or i will have to use the existing ones from the machine.
Although i might have to remove the 7i92 and 7i77 to use on the Hurco:
forum.linuxcnc.org/30-cnc-machines/33529...20p-retrofit?start=0
they lost theirs so i ordered a combo of 7i96S, 7i85S and 7i83.
-
Still waiting for some good encoder cable, or i will have to use the existing ones from the machine.
Although i might have to remove the 7i92 and 7i77 to use on the Hurco:
forum.linuxcnc.org/30-cnc-machines/33529...20p-retrofit?start=0
they lost theirs so i ordered a combo of 7i96S, 7i85S and 7i83.
Please Log in or Create an account to join the conversation.
Time to create page: 0.078 seconds