3D Printer Retrofit

tecno
Offline
Platinum Member

28 Aug 2020 15:21 #179848 by tecno

Replied by tecno on topic 3D Printer Retrofit

Simplify3D is a very good tool = I use it also. Awaiting for new revision soon I hope.

The following user(s) said Thank You: thefabricator03

Please Log in or Create an account to join the conversation.

Mike_Eitel
Offline
Platinum Member

28 Aug 2020 20:39 #179881 by Mike_Eitel

Replied by Mike_Eitel on topic 3D Printer Retrofit

Yes, i also like it.
They are just very slow with revisions and updates.

Please Log in or Create an account to join the conversation.

thefabricator03
Offline
Platinum Member

29 Aug 2020 03:25 #179905 by thefabricator03

Replied by thefabricator03 on topic 3D Printer Retrofit

My brother got me on to Simplified3d, he has printed some pretty good quality stuff using it.

The following user(s) said Thank You: tommylight, Himarc3D

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

29 Aug 2020 17:26 #179948 by tommylight

Replied by tommylight on topic 3D Printer Retrofit

@thefabricator03,
Damn, those are some nice prints !

Please Log in or Create an account to join the conversation.

thefabricator03
Offline
Platinum Member

30 Aug 2020 21:08 #180106 by thefabricator03

Replied by thefabricator03 on topic 3D Printer Retrofit

Thanks Tom, my brothers prints are what convinced me to buy my printer. He reckons that when he started using Simplify3d instead of the slicer that came with his printer the quality greatly improved.

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Time to create page: 0.342 seconds

3D Printer Retrofit

Attachments: