Connecting external power-on button to Linux CNC
- Masiwood123
-
- Offline
- Platinum Member
-
Less
More
- Posts: 335
- Thank you received: 80
17 Oct 2022 11:04 #254328
by Masiwood123
Replied by Masiwood123 on topic Connecting external power-on button to Linux CNC
Hmm, it works here, using a 7i96 I connected the pins as below and input 1 will turn the machine on and off.
net power-on hm2_7i96.0.gpio.001.in halui.machine.on
net power-off hm2_7i96.0.gpio.001.in_not halui.machine.off
is it connected to P1 or TB input?
net power-on hm2_7i96.0.gpio.001.in halui.machine.on
net power-off hm2_7i96.0.gpio.001.in_not halui.machine.off
is it connected to P1 or TB input?
Please Log in or Create an account to join the conversation.
17 Oct 2022 11:26 #254330
by phillc54
Replied by phillc54 on topic Connecting external power-on button to Linux CNC
TB3-2
The following user(s) said Thank You: Masiwood123
Please Log in or Create an account to join the conversation.
Time to create page: 0.067 seconds