Configuration decisions and tuning

Askjerry
Offline
Elite Member

29 Sep 2015 17:01 #63197 by Askjerry

Replied by Askjerry on topic Configuration decisions and tuning

Good point... because when all is said and done... G0 X5 should move it in a linear 5 unit direction... using multiple joint to accomplish that.

I have so many projects going... having fun... but wow... lots to learn...

Please Log in or Create an account to join the conversation.

cncbasher
Offline
Moderator

29 Sep 2015 20:12 #63207 by cncbasher

Replied by cncbasher on topic Configuration decisions and tuning

Jerry ,
send me an email , i have some puma setup files if there of use.
what do you need ?

The following user(s) said Thank You: Askjerry

Please Log in or Create an account to join the conversation.

Askjerry
Offline
Elite Member

29 Sep 2015 23:10 #63212 by Askjerry

Replied by Askjerry on topic Configuration decisions and tuning

At this point... my PUMA is functional... but I know of at least two others that are not... my hope/plan is to get them converted to LinuxCNC when I can... so for right now, I have been keeping an eye on all forums with PUMA and SCARA settings to get as much research material as possible for when we begin.

I'll get an email out soon... my address is: jerryarutherford(at)gmail(dot)com

Thanks,
Jerry

Please Log in or Create an account to join the conversation.

Time to create page: 0.150 seconds