Non-circular boring. (Linuxcnc fun)

More
01 May 2020 18:49 #166352 by cmorley

Cool, but I have to ask. What the heck would you use those twisted hex pockets for anyway?


cool noodle extrusion ?
The following user(s) said Thank You: tommylight, rodw, COFHAL

Please Log in or Create an account to join the conversation.

More
02 May 2020 10:49 #166398 by MovT
@Todd, its Metal-Art and i like it!

;)

Please Log in or Create an account to join the conversation.

More
03 May 2020 10:09 #166497 by rodw

@Todd, its Metal-Art and i like it!

;)


Plus Cam's noodles made me laugh!

Please Log in or Create an account to join the conversation.

More
03 May 2020 20:35 #166538 by skunkworks
some speed'ed up slow machining..

(I do talk at the 6:30ish)

The following user(s) said Thank You: Mike_Eitel, phillc54, chimeno, arvidb, tommylight, Clive S, COFHAL

Please Log in or Create an account to join the conversation.

More
10 May 2020 09:07 #167245 by Dorro1971
Great stuff....would be a great way to manufacture cam profiles on the lathe.....

Please Log in or Create an account to join the conversation.

More
16 May 2020 15:05 #167975 by skunkworks
actual encoder spinning

Please Log in or Create an account to join the conversation.

More
18 May 2020 17:08 #168165 by skunkworks
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
18 May 2020 17:24 #168167 by alkabal
Thanks a lot for sharing, can you also share some HAL config you have done ?

Br

Please Log in or Create an account to join the conversation.

More
18 May 2020 17:34 #168169 by skunkworks
In the same directory are the configs

electronicsam.com/images/greenmachine/config/

Pretty specific to my machine - and certainly not very clean.

Please Log in or Create an account to join the conversation.

More
18 May 2020 17:54 #168171 by alkabal
sorry i does check too quickly and click only the link.

Many thanks

Please Log in or Create an account to join the conversation.

Time to create page: 0.097 seconds
Powered by Kunena Forum