Check air pressure before doing anything?
06 Dec 2020 04:34 - 06 Dec 2020 04:35 #191207
by bevins
Replied by bevins on topic Check air pressure before doing anything?
If my machine looses air, catastrophic things would happen especially if a tool change was requested.
No air, no estop reset......
No air, no estop reset......
Last edit: 06 Dec 2020 04:35 by bevins.
Please Log in or Create an account to join the conversation.
06 Dec 2020 05:36 #191208
by cmorley
Replied by cmorley on topic Check air pressure before doing anything?
spindle.N.inhibit - (bit, in) When this bit is TRUE, the spindle speed is set to 0.
motion.homing-inhibit
motion.feed-inhibit - (bit, in) When this bit is TRUE, the feed rate is set to 0. This will be delayed during spindle synch moves till the end of the move.
Though if using master motion.feed-inhibit was (wrongly) changed to not include jogging.
motion.homing-inhibit
motion.feed-inhibit - (bit, in) When this bit is TRUE, the feed rate is set to 0. This will be delayed during spindle synch moves till the end of the move.
Though if using master motion.feed-inhibit was (wrongly) changed to not include jogging.
Please Log in or Create an account to join the conversation.
Time to create page: 0.096 seconds