CNC Y-axis error

12 Jan 2021 18:34 #195104 by PCW

Replied by PCW on topic CNC Y-axis error

I would comment out all lines like:

setp pid.x.maxerror 0.005

And then plot the following error

Please Log in or Create an account to join the conversation.

12 Jan 2021 20:17 #195112 by Todd Zuercher

Replied by Todd Zuercher on topic CNC Y-axis error

Have you checked your spindle/tool for run out, that could cause it to mill oversized?

Please Log in or Create an account to join the conversation.

13 Jan 2021 21:14 #195250 by Mike_Eitel

Replied by Mike_Eitel on topic CNC Y-axis error

Do you have a offset via tool table?

Please Log in or Create an account to join the conversation.

Time to create page: 0.166 seconds