Setting motion.analog-out-xx to 0 when starting the machine

More
07 Feb 2023 01:12 #263886 by MaHa
I copy/paste to a file from post #263505, and temporarily replaced the regular on_abort.ngc. Tested with axis F1,F2,ESC key and also setp the related halui.nnn pins to true/false, without error.

Please Log in or Create an account to join the conversation.

More
07 Feb 2023 10:17 #263909 by andypugh
Possibly a stray control character has crept in to the OP's NGC file then.
(Has it been edited on a Windows PC, or been near a word processor?)

Please Log in or Create an account to join the conversation.

More
08 Feb 2023 15:28 #264059 by HiSH
No, the on_abort.ngc-file is completely created and edited in Linux with geany.

Please Log in or Create an account to join the conversation.

More
09 Feb 2023 22:37 #264175 by andypugh
Have you got any further with this?

Please Log in or Create an account to join the conversation.

More
13 Feb 2023 10:31 #264415 by HiSH
In the moment, the error didn't appear, but i don't know why.
I think, i will get him again, when it's unpractical for me.
Are there some points, i can check, when there error appears again?

Please Log in or Create an account to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum