A Teensy -> Python Interface Manualmatic MPG/pendant

A few spare hours over the bank holiday weekend and we have a new design of row buttons (although the Sharpie colouring in doesn't really cut it! image missing /media/kunena/emoticons/unsure.png)...

 

... and a *very* satisfying cable clamp design.

 

Saturday night code release again - oh what a life we lead!

I've migrated the pendant codebase from the Arduino IDE to PlatformIO. This should allow refinement of the structure to add flexibility/ease maintainability of the codebase. All the major functionality is now in place but would appreciate feedback on both code and function. There's also a small wiring check test 'sketch'.

Code is here: github.com/Stutchbury/Manualmatic-Pendan...e/PlatformIO/pendant

As you may have noticed, I have spent a 'little' time creating a 3D printable case with FreeCAD. I've included a little guide for printing but it came out OK on my fairly well abused Ender 3:



STLs are here: github.com/Stutchbury/Manualmatic-Pendan...n/Hardware/case/v1.1

I have a few spare PCBs and components (minimum order at Mouser is a pain) so would be happy to make up some 'PCB + board components' kits if anyone is interested. I'm still waiting on a second order of encoders (I ordered the 'wrong' ones first time) but highly recommend avoiding the ebay specials - I've had a few that do not work reliably. Once I've tested the new ones, I'll finish up the Bill of Materials.

Enjoy!

Hi, nice work. Sorry that i ask you here but i can´t write a Pn,
is it possible to order a board from you or the layout ?

jogy2 wrote:

Hi, nice work. Sorry that i ask you here but i can´t write a Pn,
is it possible to order a board from you or the layout ?
 
No worries - I didn't realise you can't PM on this forum, if you have a github account & log in, I think my email address will be available to you.
 

Edit: If that doesn't work I'll investigate setting up a tindie acount over the weekend.

Just a quick note after a question from jogy2 via email - the Manualmatic will only boot to the splash screen unless it has a 'back end' to talk to. This would be either the LinucCNC Manualmatic component (started via the ini file) or if you're just playing, then the (very) crude mock linuxcnc script that I used for UI development will respond to many inputs and also allow you to send commands from the prompt.

To use this, cd to the Software/linuxcnc-mock directory from the github download and run:

$ ./mock_cnc_machine.py mock.ini

Plug the pendant into the USB before you start the script and Crtl-C out of the script before unplugging the USB (or your USB ports will get their knickers in a twist and the Teensy will no longer be on port /dev/ttyACM0)

There is also a wiring test PlatformIO 'sketch' that shows all the inputs on the display (assuming the wiring is OK, of course).
 

I have just created a Bill of Materials for the Manualmatic here: github.com/Stutchbury/Manualmatic-Pendant/blob/main/docs/BOM.md

Don't think I've missed anything, but let me know if I have.