Remora - ethernet NVEM / EC300 / EC500 cnc board

MCU-LINK-PRO ~$50 at Mouser

www.mouser.com/datasheet/2/302/UM11673-2940346.pdf

www.nxp.com/design/microcontrollers-deve...g-probe:MCU-LINK-PRO

i.MX RT1050 CMSIS-DAP drag-and-drop programming
community.nxp.com/t5/i-MX-RT-Knowledge-B...ramming/ta-p/1112334

scotta wrote:

 So no go for the SKR3 work until another ST-Link V2 arrives...
 

I just received 4 ST-Links in the mail, be happy to send you a couple.

I think we can use two possible options using st-links (or other STM32 boards). First - use DAPLink firmware ( github.com/armmbed/DAPLink ). Second - use J-Link firmware. I found a couple of useful tips on the electronix.ru forum and will try them when new NVEM will arrive.

epineh wrote:

scotta wrote:

 So no go for the SKR3 work until another ST-Link V2 arrives...
 
I just received 4 ST-Links in the mail, be happy to send you a couple.

That would be appreciated. My order is not due until the 16th of November....

I'll forward Russell your email so he can get in touch with you Scott.

On a side note, I was talking with an electronics engineer yesterday who worked quite a lot with the STM32 (11,000 units a year). He was saying that there is already over a 7 to 17 month back order on these chips depending on order size and it's getting worse. He and a lot of other people have been moving to other stuff that's more readily available.

Thanks! Yes, the chip shortage is impacting everywhere. In my day job we're in hypercare to ensure we get components and equipment in 2023 and 2024. Crazy times.