Remora - ethernet NVEM / EC300 / EC500 cnc board

Hi, you could try to install the SDK_2.x_MIMXRT1052xxxxB SDK to see if that helps.

I don't think it will be a source code issue as others are compiling ok.

Did you clone or copy the repo?

Downloaded the ZIP, I have that processor SDK installed. The issue seems ethernet related. I'm trying a few ways to get the firmware on the MCU. I'm trying The daplink process get The RT1052 Drive in windows. When I copy the remora firmware I get a text  file called FAIL.TXT  after its reboots

error: Failed to initialize the target MCU
type: target

hey fintech 

replied on your yt video already. 
here is a dll file that works with mach3 and the original firmwared ec500 V5
 
i got this from the manufacturer found on alibaba.
still has some issues but things are moving
so moving to remora and linuxcnc is not an option, it's a must! 
but for so long you can try to make your motors move

Holy Shit!!! I got it flashed.

• Flash second ST-Link with CMSIS-DAP-STLINK21.hex
• Install Python
• Open Command prompt with admin access
• Make sure you change directories where the files are located
• Run The Following commands

python -m pip install -U pyocd

• Install Remora Firmware

pyocd flash .\remora-rt1052.bin --target mimxrt1050_quadspi

• Flash Back to mach3

 pyocd flash .\ec500.bin --target mimxrt1050_quadspi

             





 

Thanks, I'm probably will have to convert to LinuxCNC. I have an NVEM setup with LinuxCNC I'm playing with.. I just hope the issues I'm having with stepper control and outputs is a firmware issue and not hardware problem

fintech wrote:

Holy Shit!!! I got it flashed.

• Flash second ST-Link with CMSIS-DAP-STLINK21.hex
  • Install Python
    • Open Command prompt with admin access
      • Make sure you change directories where the files are located
        • Run The Following commands
          
          python -m pip install -U pyocd
          • Install Remora Firmware
            
            pyocd flash .\remora-rt1052.bin --target mimxrt1050_quadspi
            • Flash Back to mach3
              
               pyocd flash .\ec500.bin --target mimxrt1050_quadspi
              
                           
              
              
              
              
              
               

Great to hear. I think I will remove the DAPLink stuff from the repo as to many people are having issues with it. pyOCD with CMSIS-DAP probe seems more reliable.