Potential All-in-One Single Board Computers
28 Aug 2023 16:31 - 28 Aug 2023 16:34 #279184
by royka
Replied by royka on topic Potential All-in-One Single Board Computers
@rodw Have you tried the kernel I had compiled for the s9xx? It seems like it uses the same kernel config for the s922x:
github.com/ophub/amlogic-s9xxx-armbian/
mega.nz/folder/qshRQAbR#0p25gwbiAXH41v2ZB6fZMg
github.com/ophub/amlogic-s9xxx-armbian/
mega.nz/folder/qshRQAbR#0p25gwbiAXH41v2ZB6fZMg
Last edit: 28 Aug 2023 16:34 by royka.
Please Log in or Create an account to join the conversation.
30 Aug 2023 09:34 #279362
by royka
Replied by royka on topic Potential All-in-One Single Board Computers
Please Log in or Create an account to join the conversation.
30 Aug 2023 10:54 #279366
by MX_Master
Replied by MX_Master on topic Potential All-in-One Single Board Computers
Please Log in or Create an account to join the conversation.
30 Aug 2023 20:44 #279415
by rodw
Replied by rodw on topic Potential All-in-One Single Board Computers
I'll hae a look thanks Royka
Please Log in or Create an account to join the conversation.
- nighteagle
- Offline
- Senior Member
-
Less
More
- Posts: 72
- Thank you received: 6
05 Sep 2023 13:44 #279972
by nighteagle
Replied by nighteagle on topic Potential All-in-One Single Board Computers
Hello,
have use now a Optiplex 980 with i5 with 8GB RAM for 49 Bucks. Now Linuxcnc work fine. Latency is under 38.000 with 6 glxgears and Youtube for over 24h. No errors more with LinuxCNC... so a good alternative i think and with 49 Bucks cheaper than all other ideas.
have use now a Optiplex 980 with i5 with 8GB RAM for 49 Bucks. Now Linuxcnc work fine. Latency is under 38.000 with 6 glxgears and Youtube for over 24h. No errors more with LinuxCNC... so a good alternative i think and with 49 Bucks cheaper than all other ideas.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
05 Sep 2023 14:23 #279977
by cornholio
Replied by cornholio on topic Potential All-in-One Single Board Computers
I have a Lenovo M72e tower that is good with a 4 core i5.
If want to use the on board parallel port you have to find a genuine Lenovo cable.......it's magic cable that enables the PPort and lets you change setting in the BIOS.
This I found BTSOTR when walking the dog.
If want to use the on board parallel port you have to find a genuine Lenovo cable.......it's magic cable that enables the PPort and lets you change setting in the BIOS.
This I found BTSOTR when walking the dog.
Please Log in or Create an account to join the conversation.
05 Sep 2023 14:48 #279982
by Bari
Replied by Bari on topic Potential All-in-One Single Board Computers
No link to the $49 used special PC sale?
Used and off-lease PC's are great when they are available.
Used and off-lease PC's are great when they are available.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17879
- Thank you received: 5943
05 Sep 2023 15:09 #279988
by tommylight
Replied by tommylight on topic Potential All-in-One Single Board Computers
Probably end up in my country, just one of the local sellers has two big 40 ton trucks arriving here every week.No link to the $49 used special PC sale?
Used and off-lease PC's are great when they are available.
Please Log in or Create an account to join the conversation.
11 Sep 2023 20:17 #280492
by Bari
Replied by Bari on topic Potential All-in-One Single Board Computers
sipeed.com/licheepi4a
www.tomshardware.com/news/risc-v-lichee-pi-4a-desktop-unboxing
Rpifoot print but uses RISC-V SOC.
www.tomshardware.com/news/risc-v-lichee-pi-4a-desktop-unboxing
Rpifoot print but uses RISC-V SOC.
Please Log in or Create an account to join the conversation.
13 Sep 2023 08:56 #280611
by itsemast
Replied by itsemast on topic Potential All-in-One Single Board Computers
I wonder if anyone compiled Linux with PREEMPT_RT for RISC-V CPU? Anyone got this hardware?
Please Log in or Create an account to join the conversation.
Time to create page: 0.374 seconds