Can the OPI5 be Configured to Run LCNC?

I installed heatsinks and a 512Gb .m2 card, then transferred the OS and ran the test again overnight.

The results were exactly like the one before, under 4 on the servo thread, except for the ouliers at about 25. I have to leave it running overnight for these to show up, and nothing is printed to the console. Is there a way to get the histogram to print a timestamp when the max or min latency has been exceeded?

I think the evidence is clear at this point.  I've been running this latency histogram for days, trying to determine where the glitch up to 25us was coming from.   I've got the all but perfect results above.  The only thing I haven't done is run any video. 

Is it fair to blame the glitch I got before on This Old Tony?  Maybe I should have been watching tubalcain videos? 

Update:  Didn't even get through the first youtube commercial before ouliers started showing up.

 

Nice, for someone like me who wont ever be watching videos on my milling machine this is good to see. Hopefully the OPi5+ gets similar results, I woke up this morning with an email saying that my OPi5+ shipped and is already at the "departure hub" so it wont be much longer. I have a M.2 SSD but will still need some heatsinks. It would be nice to use something like this new solid state active cooler from Frore Systems. 

AirJet mini   

It looks like it could just fit but wont know until I have the OPi5+ on hand. I might contact them and see about pricing and availability. 

Eric

We have found that playing youtubes in FF give us the worst latency results on any processor. It might not be what you see when running the machine, but it sure gives you a worst case to keep in mind.

I think you nailed it, Bari.
Look at the timestamps on the screenshots. I ran for two days, doing everything imaginable to trip it up, and you get the first screenshot. A few minutes of playing a video in FF. . . and the latency has already expanded by a factor of five. If that don't tell the story, I'm reading the wrong book.

On a different note, I'm getting my control box wired up. I've ended up using a 7i96S, due to availability, and Ill be posting my connection sheet shortly.

The one big issue I'm having is how to get +5V to the OPi5. There only seems to be an option for USB-C input. How do I get power to that from a 10A, DIN mounted supply?