Remora for RP2040

Thanks for the quick reply, will have a good read on the links provided and just ordered an picobob-dlx to make it simple from the hardware side.

Regards
Dom

Hi, i am testing the linuxcnc hal file and remora rp2040+w5500 and have a question how add outputs in the config file for enable spindle and enable coolant?. Thanks.

telmoram wrote:

Hi, i am testing the linuxcnc hal file and remora rp2040+w5500 and have a question how add outputs in the config file for enable spindle and enable coolant?. Thanks.

probably something like this

Hi
Please help me, I'm stuck.
I want to install Remora on W5500-EVB-PICO board, and I drag and drop the firmware and rp2040 answer at the ping on 10.10.10.10.
I do the rest of Linuxcnc setings and I receive the following error.


The file 'remora-nv.so' missing !
What I do wrong?
 

you need to install the component

github.com/scottalford75/Remora-NVEM/tre...Components/Remora-nv

remora-docs.readthedocs.io/en/latest/sof...mp-installation.html

I do
(sudo halcompile --install remora-eth.c) from here github.com/scottalford75/Remora/tree/mai...omponents/Remora-eth

(cp -a ~/linuxcnc/Remora/LinuxCNC/ConfigSamples/* ~/linuxcnc/configs) from here github.com/scottalford75/Remora/tree/mai...igSamples/remora-eth