Halscope tuning servos Question
25 Nov 2018 22:26 #121352
by PCW
Replied by PCW on topic Halscope tuning servos Question
Looks better, still needs more FF1 (adjust to zero error during constant motion)
The following user(s) said Thank You: jamby
Please Log in or Create an account to join the conversation.
26 Nov 2018 19:37 #121393
by jamby
Replied by jamby on topic Halscope tuning servos Question
PCW
Hey I finally got it where it looks better. It didn't take much on X just from 4.0 to 4.15 and very close to that on the other axis.
Be sides PCW much appreciated help I found these pages very helpful
TommyLight's
HERE
BigJohn's page
HERE
The Hal Turorial
HERE
AndyPugh's (second posting down)
HERE
An old but interesting post
HERE
Much thanks to all of you.
Jim
Hey I finally got it where it looks better. It didn't take much on X just from 4.0 to 4.15 and very close to that on the other axis.
Be sides PCW much appreciated help I found these pages very helpful
TommyLight's
HERE
BigJohn's page
HERE
The Hal Turorial
HERE
AndyPugh's (second posting down)
HERE
An old but interesting post
HERE
Much thanks to all of you.
Jim
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Time to create page: 0.068 seconds