Hyundai 18s hit sinumerik 840c
27 Oct 2020 00:30 #187358
by Torus13
Hyundai 18s hit sinumerik 840c was created by Torus13
Im having huge trouble with my cnc lathe:
Hyundai 18s hit on sinumerik 840c simodrive 611
Lot of plc problems etc im wondering what is The cost of retrofiting it to linuxcnc can i use old parts like main motor or servos? Is it hard to make machine and set it good with tailstock and turret?
Hyundai 18s hit on sinumerik 840c simodrive 611
Lot of plc problems etc im wondering what is The cost of retrofiting it to linuxcnc can i use old parts like main motor or servos? Is it hard to make machine and set it good with tailstock and turret?
Please Log in or Create an account to join the conversation.
27 Oct 2020 05:04 - 27 Oct 2020 05:04 #187369
by aleksamc
Replied by aleksamc on topic Hyundai 18s hit sinumerik 840c
From my experiance, retrofiting to linuxcnc is the best decision if looking on price. Also it very quailty and functional. You can leave old drives and connect linuxcnc to them. You need to study manual to your servos at first and to see what signals they are controlled. You can configure turret and tailstok also.
Last edit: 27 Oct 2020 05:04 by aleksamc.
Please Log in or Create an account to join the conversation.
27 Oct 2020 07:27 #187383
by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
What is average price od this retrofit on old drivers?
Please Log in or Create an account to join the conversation.
27 Oct 2020 08:42 #187394
by Aciera
Replied by Aciera on topic Hyundai 18s hit sinumerik 840c
Please Log in or Create an account to join the conversation.
27 Oct 2020 09:30 #187396
by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
Look like this is photo of cabine and servos used
Please Log in or Create an account to join the conversation.
27 Oct 2020 10:43 - 27 Oct 2020 10:49 #187398
by Aciera
Replied by Aciera on topic Hyundai 18s hit sinumerik 840c
So looks like those drives take a 10V Signal that would certainly be possible with a Mesa board do you know what kind of encoders are used?
Last edit: 27 Oct 2020 10:49 by Aciera.
Please Log in or Create an account to join the conversation.
27 Oct 2020 11:10 #187399
by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
I cant find them where they may be placed on back of motors?
Please Log in or Create an account to join the conversation.
27 Oct 2020 12:22 #187404
by Aciera
Replied by Aciera on topic Hyundai 18s hit sinumerik 840c
Probably. I guess they feed into the drives but I'm not sure. Do you have schematics for the wiring of the machine?
The following user(s) said Thank You: Torus13
Please Log in or Create an account to join the conversation.
27 Oct 2020 12:33 #187406
by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
Yes i will search
Please Log in or Create an account to join the conversation.
27 Oct 2020 12:36 #187407
by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
Those ones?
Please Log in or Create an account to join the conversation.
Moderators: piasdom
Time to create page: 0.094 seconds