LitexCNC: firmware and driver for 5A-75B and 5A-75E
- Lisov_R
- Offline
- New Member
-
Less
More
- Posts: 7
- Thank you received: 0
23 Dec 2024 01:36 #317172
by Lisov_R
Replied by Lisov_R on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
I just ordered this board and am gathering information. Has anyone tried flashing it with the USB-Altera-Blaster STM-32?
Please Log in or Create an account to join the conversation.
- cornholio
-
- Offline
- Platinum Member
-
Less
More
- Posts: 996
- Thank you received: 348
23 Dec 2024 02:41 #317173
by cornholio
Replied by cornholio on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
After using a USB-blaster and a ft2232 board, Ive found the ft2232 board to be the more reliable.
After messing around with the colorlight boards I found they needed quite a bit of rework for use.
So I went with a Spartan 6 dev board and some custom boards and I was able to use Mesa 7c81 firmware built to suit.
After messing around with the colorlight boards I found they needed quite a bit of rework for use.
So I went with a Spartan 6 dev board and some custom boards and I was able to use Mesa 7c81 firmware built to suit.
Please Log in or Create an account to join the conversation.
- Lisov_R
- Offline
- New Member
-
Less
More
- Posts: 7
- Thank you received: 0
23 Dec 2024 03:34 #317174
by Lisov_R
Replied by Lisov_R on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
You can link to this project.
Please Log in or Create an account to join the conversation.
- cornholio
-
- Offline
- Platinum Member
-
Less
More
- Posts: 996
- Thank you received: 348
23 Dec 2024 04:37 #317176
by cornholio
Replied by cornholio on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
The following user(s) said Thank You: Lisov_R
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.069 seconds