Bricked Mesa 7i92T

Hello! Please tell me how to update Mesaflash to the latest version and why it is missing in the latest version of LinuxCNC? Also, please tell me which firmware version I need to flash the board to get 4 axes with 4 encoders? Thank you very much!

What version of mesaflash and LinuxCNC do you have?

mesaflash --version


To install the latest LinuxCNC version, go to github.com/LinuxCNC/mesaflash
 then scroll to the bottom for "Quickstart" instructions.

LinuxCNC penultimate version (and possibly 2 versions before that)
Mesaflash 3.5.16 (was updated a little earlier because it did not recognise my board)

mesaflash 3.5.16 is the latest

If you want 4 stepgens and 4 encoders, what pinout do you want?

(If for a 7I85S you would use 7i92t_7i85sx2d.bin = config fir 7I85S with 4 stepgens, 4 encoders, 1 sserial port per connector)

The thing is, I don't know how to do it))
This is my first time doing this, and I'm already panicking because I've been trying to figure it out for over a month))) Now I've decided to ask people for help!))
My LinuxCNC doesn't have any firmware for Mesa 7i92TH at all.

I downloaded the archive for mesa 7i92t cards from the official website, but there are so many different firmware versions that I don't understand which folder I need to copy.