"I have one question how did you guys get so familiar with programming?
Do you have coding experience? You make it sound so easy but it is still over
my head."
I learned C from writing components for my machines. I had prior gcod/ macro experience and some plc programming with a langauge like basic. I had ALOT of help from Andy and Arceye(who I have annoyed a few times...).I hate ladder, so C was the only other option.
Keep in mind, no matter who you are, this takes time and you will be way ahead to work on something small on the bench.The first machine I did was a Hardinge HNC , and before I actually moved an axis, I had gotten motors tuned and working on a bench set up.I did the same with i/o using some opto boards and switches. The hardinge took me about 3 months of spare time to rewire,set up, tune and program.
there are different ways to approach the hal file and logic. Some folks do logic in their hal file, some do it in Classic ladder and some (like me) do it as components in C. I like my hal file to only be connections and each individual machine function to be a component. I dont know if the developers intended it to be done this way, but it works.
Most importantly make sure your machine is safe.....
sspeed33317 wrote: So I am searching for another motherboard instead and I will just transfer
the processor/memory etc... i figure this is the least expensive fix.
Yea I am going to try to return it and see if they take it back, i bought it from the tiger direct store here in town.
I ordered the new one online through them also. It wasn't available at the store for pickup.
But if im stuck with it, ill put together another PC for the house.
Owell if this ends up being the only mistake i'll be lucky
sspeed33317 wrote: Edit...just ordered a GA-H61M-S2PV
May I ask why?
I ask because I am at a similar cross road. I have an ATX MB I can use, but would much rather use a mini ITX MB, so I was looking at ordering something.
If one HAS to order something, I would think one would want it to be as small as practical and use as little power as easily practical, so I am curious.
Well originally the local TigerDirect only has micro ATX as the smallest motherboard in store.
We have Tiger Direct stores here in Florida.
And I already drilled and tapped the plate to mount it. So I'm kinda stuck with what I have.
Also I don't want to have to buy another CPU and memory.
Also someone on here already tested the new board and it seems to have excellent latency.
Now I have a friend with a sheetmetal shop that has a press brake with a bad controller...
So I have him watching my progress now.
