New ethercat / probe basic control for minimonster

Alright, I lied, I haven't given up yet
I went and tuned the X and Y. not perfect, but tracks within a couple microns and overshoots only 4-10 microns during 1G acceleration. Also only deviates 2-3 microns when I yank on the spindle with all my weight while moving.

If i can get the linuxcnc part going this thing is gonna rip

Awesome!

Start with the cia402 example and only add stuff from the manual you need
github.com/dbraun1981/hal-cia402
Should be easy,

problem is i have no idea what i need haha.

i do have an xml for the drive but looking inside of it, i guess that's unrelated here.

I made a twincat project just to see, and the drives are telling me i have a data type length mismatch or something. So thats not helping me any haha.

sigh. were in the "i dont even know what questions to ask" part of the project.

Ok, time to get back to this.

What am I doing again?

Poke. Figured I should stick this here.

Machine is back together with some new upgraded, ethercat is working for the xyz.

Now I'm on to making the spindle work with modbus.
Is there a simple step by step instruction to set this up? I got a usb adapter, and I'm running qtdragon. In addition to just tuning on and off, id like it to display the true spindle speed and the load.

Thanks

Hm.
Drive connected to adapter, but they aren't talking. Seems everything is set right, i dont see any mistakes.

hmmm