a chinese translation for EMC2 manual

  • dinglei618@hotmail.com
  • dinglei618@hotmail.com's Avatar Topic Author
  • Visitor
  • Visitor
17 Oct 2011 13:49 #13988 by dinglei618@hotmail.com
a chinese translation for EMC2 manual was created by dinglei618@hotmail.com
Hi guys , i have translated " EMC2_Getting_Started " into chinese .

Now i am translating "EMC2_User_Manual ".

Please visit my blog : blog.sina.com.cn/u/2370524133

Your visit will give me encouragement , thank you .
More
17 Oct 2011 14:06 #13990 by kostas
Nice! I visited you blog already.

Greetings from Greece!
Kostas
More
18 Oct 2011 12:34 #14015 by andypugh
It should be possible to get the translation hosted with the other document translations.
You might also want to check the localisation of the software:
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Internationalization
More
18 Oct 2011 20:00 #14033 by darty367
Good job B)
  • dinglei618@hotmail.com
  • dinglei618@hotmail.com's Avatar Topic Author
  • Visitor
  • Visitor
19 Oct 2011 00:31 #14042 by dinglei618@hotmail.com
Replied by dinglei618@hotmail.com on topic a chinese translation for EMC2 manual
Andypugh , You are right . But i did not use wiki before.

I'll try anyway.
More
19 Jun 2015 08:24 #59973 by Tylk
You did a good job. :laugh:
Moderators: tommylight
Time to create page: 0.100 seconds
Powered by Kunena Forum