Matsuura Mc 500v2 retrofit.

10 years 7 months ago - 10 years 7 months ago #70901 by skunkworks

Replied by skunkworks on topic Matsuura Mc 500v2 retrofit.

Better. The bracket for the index sensor is made and ready to be mounted too.. (that was at 6000rpm)

Last edit: 10 years 7 months ago by skunkworks.

Please Log in or Create an account to join the conversation.

10 years 7 months ago #70906 by Todd Zuercher

Replied by Todd Zuercher on topic Matsuura Mc 500v2 retrofit.

Looks serviceable, well done!

Please Log in or Create an account to join the conversation.

10 years 6 months ago #72733 by skunkworks

Replied by skunkworks on topic Matsuura Mc 500v2 retrofit.

hooked the spindle encoder into the 7i48. seems to count and sees the index.

Please Log in or Create an account to join the conversation.

10 years 6 months ago #72841 by skunkworks

Replied by skunkworks on topic Matsuura Mc 500v2 retrofit.

Spindle RPM back to linuxcnc

Please Log in or Create an account to join the conversation.

10 years 6 months ago #73530 by skunkworks

Replied by skunkworks on topic Matsuura Mc 500v2 retrofit.

Started ripping out and mounting mesa equipment. The smart serial daughter boards are really going to clean up the wiring.

sam

Please Log in or Create an account to join the conversation.

10 years 6 months ago #73547 by BigJohnT

Replied by BigJohnT on topic Matsuura Mc 500v2 retrofit.

Looking good!
I have an Opto22 and it has two terminals marked + and - do they power up the Opto22 board?

JT

Please Log in or Create an account to join the conversation.

Time to create page: 0.436 seconds