Jerk after plunge move, with spindle on

Todd Zuercher
Away
Platinum Member

09 Mar 2016 15:37 - 09 Mar 2016 15:44 #71285 by Todd Zuercher

Replied by Todd Zuercher on topic Jerk after plunge move, with spindle on

Also moving your first G1 move one place farther up also removes the hiccup (or covers it up at least).

%
G17 G21 G90 G40 G80 G64 P0.25 G49 G0 M05
G90 M05 Z0
G43 H1
G0 G90 X0. Y0
T1 M6
S3000 M3 (simply removing M3 changes axis velocities)
G1 Z2.
Z-22.5 F750.
(JERK HAPPENED HERE)
X50 F1500.
x100
G0 Z2.
G90 G49 G0 M05
%

Last edit: 09 Mar 2016 15:44 by Todd Zuercher.

Please Log in or Create an account to join the conversation.

terans1085
Topic Author
Offline
Junior Member

09 Mar 2016 17:05 #71287 by terans1085

Replied by terans1085 on topic Jerk after plunge move, with spindle on

Well I started the thread as I thought something was out of place in the machine configuration, but given this, i guess not much could be done except playing around with the gcodes! Oh, and thank you guys for your time and help

Please Log in or Create an account to join the conversation.

Time to create page: 0.100 seconds