Spindle configuration

Sorry to intervene, but:
axis.0.amd-enable-out
Should be
axis.0.cmd-enable-out

tommylight wrote: Sorry to intervene, but:
axis.0.amd-enable-out
Should be
axis.0.cmd-enable-out

Actually, I was trying for amp-enable-out, but mis-typing from memory.

Thank you for the explenation. i will let know how it went

Hi,

I don't find the right connections on my panel. i have not enough information about my panel.
Maby does someone know more about this panel?
Here are some pictures from my X2 panel.

The PCB has screen-printed legends on it, those are almost certain to be consistent with the description of the other panels in the documentation.
So, it should be possible to work out what each terminal is for from the screen-print and the manual.

i know thate the black, white, brown and green wire are going to the tacho of the motor. the blue whire on the left, number one is a ground. al the other whires i didn't find. and in the manual that is available is alsow nothing to find.